Skip to content

Click here to request for a quote or call us +966 5645 58433

 +966 5951 95007

Where To Place Water Treatment Plant in Cities Skylines

Water is an essential element for human survival, and ensuring that it’s clean and safe to drink is crucial. In a bustling metropolis like Cities Skylines, managing water treatment can be quite complicated.

Finding the perfect location for a water treatment plant can be a daunting task, especially for new players. However, fear not, as in this blog post, we’ll provide you with some valuable insights on where to place your water treatment plant in Cities Skylines to ensure that your city’s water supply is safe and secure. Keep reading to learn more!

Cities Skylines

Cities Skylines


Downstream from sewage pipes

When it comes to placing a water treatment plant in Cities: Skylines, it is important to do it downstream from sewage pipes. This ensures that the sewage flows down to the water treatment plant instead of upstream, which could potentially cause sewage backups and other issues.

It is important to note that the water treatment plant should completely replace the sewage pipes, rather than being used in conjunction with them. This will reduce pollution, resulting in cleaner water for your citizens to use.

As I have found from experience, placing the water treatment plant downstream from the sewage pipes is the most effective way to manage sewage and prevent any issues from arising.

How to Clean Polluted Water

How to Clean Polluted Water


Near polluted water sources

Oh no, my city’s water supply is polluted! This can lead to sickness and decreased land value for my citizens. If you’re reading this guide, you’re probably experiencing the same issue.

The primary cause of water pollution in Cities: Skylines is sewage, which is typically pumped via water pipes into bodies of water and returns in the form of sewage. However, by placing your sewage outlets downstream from your water intake, you can avoid polluted water issues.

It’s also ideal to zone industrial areas away from bodies of water and avoid using water drain pipes on bodies of water at all.

Another tip for fixing water pollution is to strategically move your drain pipes around. If you’re constrained by a budget, this method may be best suited for you.

However, one of the easiest ways to limit water pollution is by using the edges of the map. By placing sewage pumps at the edge of the map, you can ensure that the water flow will carry the sewage away from clean water supplies.

Additionally, by watching for water currents when placing buildings, you can avoid polluted water from entering clean water supplies or negatively impacting your city.

Ultimately, there are several methods for fixing water pollution in Cities: Skylines. One of the best methods involves planning ahead of time to keep the fresh water supply to your city free of pollution.

This means keeping the water pumps and sewage plants separate from each other as often as possible. You can also use eco sewage treatment plants and floating garbage collectors made available through the Green Cities DLC.

Regardless of how you decide to fix water pollution, the key is to take preventative measures when building your city and keep the flow of polluted water away from your clean water sources.

On the shoreline

I recently started playing Cities Skylines and have been facing some challenges with regards to placing water treatment plants on the shoreline. I am building a shoreline city with no river and have placed my water intake on one side of the shoreline and my sewage on the other. However, there isn’t enough current to keep the sewage from collecting.

To combat this issue, I tried placing water pumping stations in the sewage and terminating the pipe without connecting it to the water supply. This method worked to filter the shoreline water to clean, but recently, many of my water pumping stations have stopped working any clear reason why.

I have three water treatment plants in my city, and I even tried building a hydro-electric dam around the cove where I have the water treatment plants to contain the sewage or encourage water flow.

However, my water pumping stations are still not working. I need them to work as my water filter and sewage removal since there is nowhere else for me to evacuate the waste without it contaminating my drinking water.

Overall, I am struggling to understand the best way to place water treatment plants on the shoreline in Cities Skylines. If anyone has any tips or suggestions, I would greatly appreciate it. Despite the challenges, I am enjoying the game and excited to continue learning and improving my city-building skills.

Near drain pipes

Water treatment plants in Cities: Skylines can be a bit tricky to use effectively. One key consideration to keep in mind is where to place them. I’ve found that locating the water treatment plants near the drain pipes is the most efficient strategy.

By doing so, you can ensure that the pollution emerging from the pipes is effectively treated, thereby reducing the amount of contamination in the surrounding water sources. However, keep in mind that the plants themselves do emit some pollution, although significantly less than the drain pipes do.

So, placing the treatment plants close to the drain pipes will help minimize the overall contamination and keep your city’s water sources clean and safe.

Cities Skylines

Cities Skylines


In proximity to water pumping stations

When playing Cities: Skylines, I always make sure to strategically place my water treatment plants near water pumping stations. This helps to ensure that the clean water output from the treatment plant directly enters the water pumping station without being contaminated by sewage.

By doing this, I can guarantee that my citizens have access to clean and safe drinking water. Additionally, placing the treatment plant near the pumping station maximizes its efficiency and reduces the cost of maintenance.

I always aim to provide the best services for my city within my budget, and this placement strategy helps me achieve that goal.

Not only is the placement of water treatment plants near pumping stations practical and efficient, but it also helps to minimize the environmental impact of my city. By reducing the amount of pollution in the water system, my citizens can enjoy a cleaner and healthier environment.

Furthermore, this positive environmental impact can attract more people to my city and increase its overall land value.

Apart from direct placement, there are other ways to mitigate water pollution in Cities: Skylines. For instance, I can ensure that industrial and waste-producing buildings are properly zoned away from bodies of water.

This prevents the waste from contaminating the water supply and causing pollution. Additionally, the use of inland water treatment plants and water towers can also help to avoid the use of water drain pipes, which are responsible for polluting the bodies of water in the game.

Overall, placing water treatment plants in proximity to water pumping stations is a critical step in reducing water pollution and maintaining the health and wellbeing of my citizens.

This placement strategy helps to maximize efficiency, reduce costs and minimize the environmental impact of my city. By taking these steps, I can ensure that my city remains prosperous and sustainable for years to come.

Fools Town

Fools Town


In areas with high water usage

I recently faced a problem of water pollution in my city in Cities: Skylines. The issue became a constant headache, leading me to move my water pumps frequently. However, I found out that the real culprit was dirty water being sucked in by my pumps. So, I decided to place my sewage outputs as far away from my water pumps and treatment plants as possible.

While planning my city placement, I realized that separating water pumps and sewage plants altogether was the best method to keep water pollution at bay. I observed the natural flow of the water in my map with the help of arrows shown with the placement of water supply and sewage-related buildings.

This helped me ensure that the flow would not carry polluted water into clean water pumps, minimizing pollution risk.

In addition to that, I found out that dumping sewage on land was an excellent option for waste disposal, especially in areas with low water supply. However, one should keep in mind that ground pollution could still occur.

I tried placing land-based sewage outputs in already polluted areas such as near landfills or industrial areas to avoid further issues.

I learned that one can also let nature take its course in fixing the pollution caused by sewage by relocating the sewage plants to another location. Over time, the ground and water pollution caused by sewage will rectify itself.

In conclusion, careful planning, proper placement, and proactive measures are some of the key steps to keep the water supply and treatment plants efficient while minimizing the risk of water pollution in Cities: Skylines.

In areas with high sewage output

When it comes to building a city in Cities: Skylines, considering the location of a water treatment plant is of utmost importance. If you have a high sewage output, it is best to place the treatment plant away from residential or commercial areas. This will help avoid pollution and ensure the safety of citizens.

Additionally, it is crucial to keep water pumps and sewage plants separate from each other. By doing this, you can keep the fresh water supply to your city entirely free of pollution. This method may not reduce pollution from the sewage itself, but it will prevent contamination of the water supply that your residents use every day.

When placing buildings that deal with water, be mindful of the water currents. The flow of water can be shown by arrows in the game. Make sure that the flow of water will not carry polluted water into a clean water pump.

If your map has a limited water supply, dumping sewage on land can be an option for waste disposal. However, keep in mind that this may result in ground pollution. Consider placing land-based sewage outputs in already polluted areas, such as by a landfill or industry area.

Lastly, if none of the above methods work, you can relocate the sewage plant to another location and let nature remove the pollution itself. Over time, ground and water pollution caused by sewage will fix itself, and the pollution will be removed.

In conclusion, when building a city in Cities: Skylines, make sure to take into account the location of water treatment plants. Placing them in a safe and strategic area away from residential or commercial zones, and keeping them separate from water pumps will help minimize pollution risk and keep your citizens healthy and happy.

Upstream from water towers

When it comes to managing a city’s water supply in Cities: Skylines, one of the most critical infrastructure decisions you’ll have to make is where to place your water treatment plant.

As a player, I take this decision seriously and always aim to optimize my system’s efficiency. To do this, I prefer to place my water towers upstream from my treatment plants. By doing this, I ensure that the water I use for my citizens is as clean as possible, and I’m not relying on polluted sources.

The water towers act as a buffer between the polluted sources and my citizens, reducing the chances of contamination and improving the overall health of the city’s water supply.

In my experience, water towers have worked effectively in reducing water pollution in my cities. I try to place them on high ground, where they can get the best water supply without any contaminants.

When I first started playing, I made the mistake of relying solely on water pumps, which led to contaminated water sources and sick citizens. There is no use in compromising the health of your people with polluted water sources when you can invest in water towers to improve the quality of your water supply significantly.

You may be wondering why I choose to invest in water towers instead of relying on water pumps like in the vanilla scenario. The simple reason is that water pumps draw water from their immediate surroundings, and if there is a pollutant in that area, the water pumped will be contaminated.

However, water towers can draw water from underground or external sources, reducing the risk of contamination. Additionally, water towers do not rely on the same water source as pumps, and this provides another layer of protection for my citizens.

To summarize, when it comes to placing a water treatment plant in Cities: Skylines, it’s crucial to prioritize the health of your citizens and the efficiency of your system.

Investing in water towers is an excellent way to ensure that you are not relying on contaminated water sources, and it provides an added layer of protection for your citizens. Placing them upstream from the treatment plant improves the overall health of your city’s water supply, making it a worthwhile investment.

At the end of the day, it’s essential to be creative, think outside of the box and prioritize efficient water management to build a thriving city.

Sewage Treatment Plant

Sewage Treatment Plant


Near industrial areas

I recently found out that water pollution in Cities: Skylines can be a huge problem, especially if you’re placing sewage outlets too close to your water intake. The game makes it clear from the onset that you should place your sewage outlets downstream from the water sucked up by your water intake to prevent polluted water. However, if you’re already facing water pollution in your city, there are several ways to fix it.

One way is to actively reduce water pollution by using structures that process and clean up waste. Another method is to stop the source of pollution by being strategic with building placement and industry zoning.

As a player, I’ve found that one effective way to reduce water pollution in my city is to build water treatment plants. I usually place them near my industrial areas to reduce pollution levels in the water bodies nearby.

However, it’s important to note that these plants should replace drain pipes that spill sewage into the water, not be used alongside them. Water treatment plants not only pollute water much less, but they also process more waste compared to drain pipes.

Using water treatment plants has been beneficial for me since they emit only 20% of the water pollution that drain pipes produce and process 33% more waste. The downside is that they cost more and consume more energy compared to drain pipes, but the benefits outweigh the costs.

I prefer using them over drain pipes, especially in a huge city where the majority of the water near me can turn brown due to pollution. If you’re facing a similar issue in your city, you may want to try using water treatment plants as well.




In densely populated areas

I have been playing Cities: Skylines for quite some time now, and one of the most important things I have learned is the importance of water treatment plants. In order to keep my city functioning, I need to have a reliable and efficient water system in place. But where is the best place to put a water treatment plant?

When it comes to placing a water treatment plant, there are several factors to consider. One of the most important is the location. Ideally, you want to place the plant near a source of water, such as a river or lake. This will make it easier to pump water into the plant and treat it before distributing it to your city.

Another factor to consider is the size of your city. If you have a small city, you may only need one or two treatment plants. However, if your city is larger, you may need multiple plants to ensure that you can keep up with the demand for water.

It’s also important to think about the layout of your city. You don’t want to place a water treatment plant in the middle of a residential area, as this can lead to complaints from residents about noise and pollution. Instead, try to place the plant on the outskirts of your city, away from residential areas.

Overall, the placement of a water treatment plant is crucial for the success of your city. By considering factors such as location, size, and layout, you can ensure that you have a reliable and efficient water system in place.

Leave a Reply

Your email address will not be published. Required fields are marked *